REF Illustration
Description
QTY
A
Seat
1
B
Seat supports
2
C
10-1.50mm x 75mm
bolts
washers
4
D
Wedge Anchors
Compotents
Assembly Instruction CL-
802/702
Page 1: ...REF Illustration Description QTY A Seat 1 B Seat supports 2 C 10 1 50mm x 75mm bolts washers 4 4 D Wedge Anchors 4 Compotents Assembly Instruction CL 802 702 ...
Page 2: ...mmendations To protect the powdercoating finish during assmebly please place unwrapped powdercoated parts on non marring surface Please do not place parts on cement or other hard surface If damage on finish occurs please use touch up paint to avoid rust in future Insert screws and install hex nuts with washers and tighten carefully to avoid damaging finish Assembly Instruction CL 802 702 ...
Page 3: ...g tightening 2 Clean all the dust out of the hole with a blower or similar tool 3 Hammer the expansion bolt into the hole Gently tap the wedge anchors until it is at the bottom of the drilled hole Two or three solid blows to compact the lead 4 Tighten the nuts firmly Make sure the nut has not been over tightened otherwise you can cause unnecessary stress on the wedge anchors and cause it to break ...
