Restore factory configuration
When powering up (before the indicator light flashes
), press and hold the FUNC
key for five to ten seconds. The system will automatically clear the saved
configuration, including: network, mine pool, password and other information. After
the configuration is cleared, the indicator blinks white frequently, indicating that the
configuration is successful. After releasing the FUNC button, press the RESET button
to restart, or disconnect the power supply to re-power, the system will work with the
default factory configuration
.
Equipment warranty
During use, the device may not work properly due to loose connection or abnormal
damage of the device. You can check and troubleshoot it yourself. If the device is
damaged and covered by warranty, you can contact our after-sales personnel for a
quick return. This product provides a warranty of 180 days from the time the user
receives the goods, but the following conditions will void the warranty:
• Any physical damage caused by self-removal of the device or other reasons
(including but not limited to: breakage, chipping, missing corners, missing
components, etc.)
• Damage caused by lightning strikes, voltage surges, etc.
• The board has burnt marks or the chip is burnt
• Damage caused by water ingress and immersion
• The board is wet and corroded
• overdue warranty
If this happens unfortunately, we can still provide a repair service for your
equipment. You can also contact the after-sales personnel to purchase parts for
repair.
