CAN FO5000, Instruction Booklet

Page: 21 / 40

BUILT-IN GAS OVENS WITH GRILL ▪ FO Series
20
FO Series – ed. 01/2020
CAUTION!
During installation and connection operations, the gas conductor tube of the device
shall not be subjected to torsion, tensile or other mechanical stresses which may
impair its tightness and strength.
After connecting the equipment to the gas network, check the tightness of the fittings using a soap
and water solution or using a device for leak tests under pressure, normally part of hardware of
installers of gas systems.
CAUTION!
During installation, connection and use, the hose of the appliance shall not be
subjected to torsion, traction or any other mechanical/thermal stress that may
compromise tightness and strength.
CAUTION!
It is strictly forbidden to use open flames to verify the tightness and for commissioning
of the device! If the test is satisfactory, it is possible to start all burners to verify that the
flame is smooth and stable.tc...).
WIRING
The products to which this manual refers are equipped with electronic ignition and are, therefore,
equipped with a spark generator supplied in direct current at very low voltage (12 V DC) for the
ignition of the burners. The generator is located on the back panel of the product and can be easily
inspected.