UNCRATING
rbs2011-014-002
TYPICAL - RH SIDE
Sub-crate that contains front fender
Parts Check
Ensure that the crate includes the following items
(inside front storage compartment):
DESCRIPTION
MODEL
QTY
Operator's
guide
1
Predelivery
check list
1
Safety DVD
1
Predelivery kit
1
Service center
panel
1
Wheel caps
All
2
The predelivery kit includes the following items:
DESCRIPTION (LOCATION)
QTY
M6 X 20 hexagonal flange screw (front
storage compartment)
4
M6 X 12 hexagonal flange screw (front
storage compartment)
2
M6 panel nut (body panels)
4
M6 x 20 Torx screw (body panels)
4
Plastic washer (body panels)
4
M8 x 35 hexagonal flange screw (front
fender)
8
Sleeve (front fender)
8
M6 X 20 hexagonal flange screw (AAPTS
sensor)
1
M6 caged nut (AAPTS sensor)
1
Foam (AAPTS sensor)
1
Locking tie (rear fender)
3
M6 X 20 Torx screw (rear fender)
4
DESCRIPTION (LOCATION)
QTY
Plastic washer (rear fender)
4
M6 elastic flange nut (rear fender)
4
Battery installation kit (2 bolts and 2 nuts)
1
Vehicle Removal
WARNING
SE5 models are automatically set in neutral
position when engine is stopped. Always ap-
ply parking brake before working on vehicle.
WARNING
No one should be standing in front or at the
back of the vehicle while straps are being cut.
NOTE:
Parking brake pedal brakes only the rear
wheel. Press it down to operate. The parking
brake pedal is behind the operator's left footpeg.
1. Remove straps retaining front vehicle to crate
skid.
rbl2008-003-201_a
1. Front straps
2. Remove straps on the side of vehicle.
rbl2008-003-202_b
1. Side straps
PREDELIVERY
2012-1
5 / 37
