Can-Am Outlander 500 2008, Operator'S Manual, Page: 130 / 152

BODY/FRAME
Hitch/Trailer Ball
Condition
Check tightness of fasteners and
tightness/condition
of trailer ball.
Properly retighten as necessary and
replace ball if worn.
Frame Fasteners
Check fastener condition and tight-
ness on the vehicle.
Retighten as
required.
Storage Cover Latches
Ensure front access compartment
cover and rear storage cover compart-
ment are properly latched and that
latches are in good condition.
Seat Fasteners
Remove seat and check latch mecha-
nism and pin for wear. See an autho-
rized Can-Am dealer for parts replace-
ment if damaged.
Vehicle Cleaning and
Protection
Never use a high pressure washer to
clean the vehicle.
USE LOW PRES-
SURE ONLY (like a garden hose).
High pressure can cause electrical or
mechanical damages.
Painted parts which are damaged
should be properly repainted to pre-
vent rust.
When required, wash the body with
hot water and soap (only use mild de-
tergent). Apply non-abrasive wax.
CAUTION: Never clean plastic parts
with strong detergent, degreasing
agent, paint thinner, acetone, etc.
While reading this Operator’s Guide, remember that:

WARNING
Indicates a potential hazard that, if not avoided, could result in serious in-
jury or death.
128
_____________________