Can-Am 2008 Outlander 400 EFI, Shop Manual

Page: 492 / 599

PARTS TO BE INSTALLED
2
2
1
vsi2006-028-002_a
1. Handlebar guard
2. U-clamps
6. Install U-clamps with the arrows pointed to-
ward the front of vehicle.
7. Secure handlebar guard using U-clamps and re-
taining screws.
vmr2006-025-005_a
1. U-clamp
NOTE:
The U-clamps and retaining screws are in-
cluded in the handlebar guard box.
Mudguard
LTD Models
1. Install mudguard kit as per their installation in-
structions (included in the kit).
Accessories Installation
1. Install accessories (if any) as per their installa-
tion instructions (included in each kit).
2. Install any other equipment required by law (if
any).
Vehicle Decals
1. Install decals on vehicle according to customer
country language and local legislation.
2. Ensure that the new decals are installed at the
same location and over the factory installed de-
cals.
Wind Deflector
X Models
1. Install M8 screw in full wrap support.
2. Insert beveled bracket in M8 screw.
3. Screw on threaded beveled bracket into M8
screw.
vsi2008-018-004_b
1. Full wrap support
2. M8 screw
3. Beveled bracket
4. Threaded beveled bracket
4. Align wind deflector on full wrap support
5. Install M4 bolt and M4 nut.
6. Torque M4 nut to 3 N•m (27 lbf• in ).
vsi2008-018-007_b
1. M4 bolt
2. M4 nut
7. Insert M5 nut in full wrap support middle hous-
ing.
10 / 34 2009-2 PREDELIVERY
sales@midwestmanuals.com
sales@midwestmanuals.com