CAMTREE Hunt FS-700 Cage kit 7
Note:
Pulling the knob upwards releases the
MB-20 CF matte box allowing it to easily
swing away from the camera.
Now attach the fully assembled matte box
to 300mm rods with the help of metal
front adjuster and tighten the knob
properly to secure it.
Now attach the second side (the narrow
side) of the knicker on to the lens. Press
the clip and pull the rubber string
outward to adjust the knicker properly.
Mount the provided Lemo splitter onto
300mm rods and secure it by tightening
the knob.
Note:
You can adjust the splitter at different angles or positions (Low, Straight & Top Mode) by
turning the knob for balance purpose as shown in the image below.
