Camsat GlobalCAM-LTE, User Manual

Page: 8 / 16

3. Go to Step 2 - FIREWALL> Port Forwarding
Launching can be carried out in two ways:
a)
Method 1
Commissioning with one camera or one recorder.
A very simple method that redirects all ports to only one camera
IP. Note: this method only works with one IP camera or one other device
connected to GlobalCAM-LTE. In case there are more cameras or other devices in
the network, this method is not recommended.
Check the option "
Use all ports forwarding (DMZ) " and enter the IP address of
the DVR or camera below that will be connected to the GlobalCAM-LTE transmitter.
Selecting this option will forward all network ports only to this device, allowing ac-
cess to all services through a public WAN IP address.
b) Method 2
Advanced commissioning - one, two or more network devices.
The method of port forwarding for more cameras or where other IP devices are
available in the network to be connected. This method gives a greater possibility
to manage and secure the LAN.
Use the
"Port Forwarding" or "Port Range Redirection" option to indicate the
appropriate ports on all network devices.
Complete the list of ports by entering the ones you want to access from the public
WAN IP address. Choose the name and protocol, enter the port number in the
"From Port" fields from the WAN "To IP" and "To port" in the LAN network. The
port number in the "From Port" field from the WAN network can not be repeated.
Example configuration for two IP cameras (HTTP 80 and RTSP 554 ports):
Each subsequent camera should have a different external port number in the
"From Port" field from the WAN, e.g. the next unused port.