Camsat CDS-LIFT IP, User Manual, Page: 6 / 16

Function SETTINGS
CH 161 (FCC)
CH 165 (FCC) 5.805 Ghz
(192.168.119.x)
5.825 Ghz
(192.168.120.x)
Transmitter ID
number:
Transmitter no
1
(192.168.x.2)
Transmitter no
2
(192.168.x.3)
Transmitter no
3
(192.168.x.4)
Transmitter no
4
(192.168.x.5)
MASTER receiver and all SLAVE transmitters must be set to the same operating channel to
establish connection. And then, each of the next set working nearby must be set to a different
operating channel.
Multipoint Configuration
CDS-LiftIP can be connected in a point-to-multipoint configuration. You can connect the
device from several elevators to one receiver. For such an application you should provide
optical visibility between each transmitter and the receiver!
These settings are configured by switches 7 and 8 in each transmitter according to the
following formula:
After 90 seconds since power on, unit will establish interconnection of sending data
transparently between all ports of devices.
In the case of connection problems check:
•
Directivity of antennas and if there are no obstacles between them
•
Change the channel number to another one.
•
Check the power supply capacity or replace another.