Supplement A:
Applies to version with SMA antenna connectors:
Connection of CDS-EasyIP / SMA module without connected external antenna may result in
device damage, which is not covered by the warranty. If you use the CDS-EasyIP / SMA
module adjust the output power of the device to gain of used antenna. EIRP power must not
exceed the permissible power, as described in the regulations of the country where you install
the devices. If you are not sure what settings to use, consult your supplier. Power adjustments
can be done through the web panel.
Connect the antenna cables gently to the antenna terminals on the unit and in the antenna.
Close the protective cover precisely and remember to cut out the holes for additional cables.
NOTE: Askew screwing the antenna cables may permanently damage the SMA socket.
NOTE: Please pay special attention to the type (male / female) of SMA connectors used in the
RF cable.
