8. Operating mode settings (transmitter / receiver)
The next step is to configure the basic parameters of the radio connection to be set
in the menu
CAMERA CONNECTION SETTINGS → Wireless.
WAN Connection Type in the WAN Settings tab should remain set to VIDEO BRIDGE – it is the
default option recommended for use with IP cameras. Next, select the operating Mode in the
Wireless Settings tab:
MASTER (NVR/DVR)
– for the collection point, (unit connected to the recorder).
SLAVE (Cameras)
– for broadcasting points (connected to the IP cameras).
Important: Set up the frequency channels taking into account information from point 15 of chapter
III of this manual.
9. SSID radio link name
(Required only for subsequent receivers)
To ensure communication between the
CDS-6IP 3POE
wireless modules, all units must use the
same SSID (set it in the
Wireless Settings
tab,
Link Name (SSID)
parameter). When setting up
the SLAVE (Cameras) modules you can search for already working MASTER (NVR/DVR)
modules using the
SCAN MASTERS
option and select the module with which you want to
connect to from the list.
The changes must be confirmed by pressing the
Save Changes
button.
The SSID must be unique for each receiver on the site.
17
Summary of Contents for CDS-6IP 3PoE
Page 9: ...6 Some connection options with IP cameras 9 ...
Page 10: ...10 ...
Page 11: ...11 ...
Page 25: ...25 ...
