Analogue Telephony Adaptor User Manual
7
Managing the device
35
Setting the region
The region where you are using the device is setup when you first
configure the device and so you should normally not need to change this
setting. (See
Step 3. Configure your country on page 17.)
To set the region or country where you are using the device, follow the
procedure below:
Choose the country from the Region or country drop-down list box.
Click on Save Changes.
The Home page is displayed.
The call progress tones are also updated to use the tones specific to the
region that has been selected.
Setting the time format
All call information displayed by the web pages contains details about the
time of the call. You can configure the display of this time to be shown in
12-hour or 24-hour format.
To set the time format, follow the procedure below:
Click on the radio button alongside the time format you require in the
Time format field.
Click on Save Changes.
The Home page is displayed. The messages window will show the new
time format in the top-right corner of the window.
Setting the Time zone
To set the time zone for your region, follow the procedure below:
Choose the time zone from the Time zone drop-down list box.
Click on Save Changes.
The Home page is displayed. The Messages window will show the new
time zone displayed in the top-right corner of the window, alongside the
time.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030
