3
Important Safety Instructions
l
Read all instructions before using the wine cooler
l
Never allow children to operate or play with the cooler
l
Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.
l
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other
appliance. The fumes can create a fire hazard or explosion.
Save these instructions
Installation Instructions
Before using your wine cooler
l
Remove the exterior and interior packing
l
Check to be sure the following parts are included:
u
4 Slide out shelves
u
1 Instruction manual
l
Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will
reduce the possibility of a malfunction in the cooling system from handling during transportation.
l
Clean the interior surface with lukewarm water using a soft cloth.
l
Place your appliance on a floor that is strong enough to support the appliance when it is fully loaded.
To level your appliance, adjust the front legs at the bottom of the appliance.
l
The handle installing
The wine cooler comes with 1 metal stainless steel handle. To install simply screw them to the door with the
supplied screws
l
Installation should be done away from direct sunlight and sources of heat (stove, heater, radiator, etc.).Direct
sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold or
hot ambient temperatures may also cause the appliances not to perform properly.
l
Designed for indoor use only
To reduce the risk of fire, electrical shock, or injury when using your
appliance, follows these basic precautions;
