9
9
There are two ways to place the end of drain hose:
•
• Position drain hose properly ,otherwise damage might result of water leakage.
Do not
kink or protract the drain hose.
• If drain hose is too long, do not force it into washing machine as it will cause
abnormal noises.
Trough Hose
Retainer
Bin
d
M
in
.8
6c
m
M
ax
.1
00
cm
Warning!
Warning!
Water
trough
Under3m
Under 15cm
M
in
.
86
cm
10
0c
m
M
ax
.
1.For lower drain system
2.For upper drain system
1.
Check if the legs are closely attached
the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.
Check alignment of the product with a
spirit level and if required, correct.
3.Loosen the lock nut and turn the feet
until it closely contacts with
to
the floor.
4.After being locked properly, press four
corners again to make sure that they has
been adjusted properly.
• The
lock nuts
on all four feet must
be
screwed tightly
against
the
housing.
Levelling the washing machine
Warning!
INSTALLATION
Lock
nut
foot
Right
Wrong
Raise
Lower
Lock
Loosen
The installation of drain hose
Clamping spring
Drain
inserted
hose
into the drain
