Campomatic TL07T, Instruction Manual

Page: 14 / 28

14
About the procedure of full automatic wash program
Jeans
High wash ability, suitable to wash heavy or serious stained clothes.
Special features
Delay time means the preset beginning
time of washing.
2. Open the tap and lay the drain hose.
3. Put in the laundry and detergent.
Delay time program
Confirmation of the delay and inspection
1. After the delay function is started, the corresponding delay light will flash, and other lights
are turned off.
2. After the delay function is started , press “ Delay” button continuously , you may inspect
the preset program and function . Loose the button , the program return to delay status.
Cancel the delay time, or alternate the delay time
2. To change the delay time , cancel the delay time first ,
and then press “Delay” button to reset.
1. Switch on the power
.
4. Select the propre water level according
to the quantity of clothes.
5. Select the functions and programs.
6. Press “DELAY” button to select the
beginning time of washing.
7. close the lid and press “START/PAUSE”
button
1. Press “ Power” button to cancel the delay time.
Press t he “ D ELAY” b utton e ach t ime,
the n umber o n the d igital i ndication
adds b y “1” ; After the n umber
reaches “ 24”,press t he “ D ELAY”button
each t ime , t he n umber a dds b y “6” ;
After t he n umber reaches 4 8, t he l ight
of d elay t ime i s turned o ff , a nd t he
delay p rogram return to original status.
Quick
Wash time is short. Suitable to wash light stained clothes and clothes in summer.
Air dry
As for not easily fading,deforming , and non-waterproof clothes , can use the function
to dry clothes without heating, and to reach the result of being dried in a room.
Anti-wrinkle
The wash time is short,rinses many time with high water level,thoroughly wash away the
garment.
Silk
Delicate wash, especially for silk fabrics.
1. If the machine do not start to work within 10 minutes after powered on, it will power off automatically.
2. After end of operation and the buzzer sounding 6 times, it will power off automatically.
Function of automatic power shut off
Function of adjusting for imbalance
1. If the laundry is placed uneven before spinning, it is likely to cause vibration during spinning. The
washing machine has a function of adjusting imbalance. When working,the washing machine always
inspects operation state automatically. If the spinning vibration is too great, the washing machine
automatically starts the adjusting program to balance.
2. When the machine adjusts imbalance, rinse light will flash, and the machine will start to inject water
to set water level. The machine adjusts imbalance automatically for about 1 minute, then drains water,
returns to original spinning state. If the washing machine can adjust the imbalance twice. If the
adjustment has no function, it will alarm.
Fuzzy control function
Standard procedures default implementation fuzzy control function. After startup,
such as water level before starting the keys will be cancelled automatically
according to the fuzzy control functions;
In addition, the fuzzy measure before, if
there is no water, tub fuzzy measurement, the water level directly as the default
file namely 6 gear levels.
Fuzzy control function is at boot automatically after the determination of cloth is
measured, decide the water level. In fuzzy testing process, water circulation flashing
lights display, digital pipe display "--".
Power failure memory function
If t
he power supply becomes off suddenly during operation, the machine remembers the
current operation state.When power is on,the machine returns to former operation state
automatically.