5
rc2000
ENG
7. Cord rewinding: hold the plug and pull out the cord; press the cord rewinding pedal, the
power cord will be drawn in(Fig 9)
Maintenance
1. Change the dust bag :when the wind indicator turns to be red,it is time to clear the dust
bag or replace with a new bag(Fig 1)
Open the front cover by clipping(Fig 1)
Take out the bag holder then remove the full dust bag(Fig 3)
Install the dust bag: insert the dust bag into the bag holder and then put it in the slot cabinet(Fig
4)
If the dust bag is not installed, the front cover can
’
t be closed
2. Inlet filter: clean the filter with warm water once a year and you can re-install it after it is
completely dry. If the filter is damaged, a new filter should be replaced(Fig 5)
3. Exchange the inlet filter: clip down and remove the inlet cover by hand for exchange of
filter(Fig 6)
4. Clean the filter: open the outlet cover and take out the HEPA frame and filter. Wash it and
install it after it is dry(Fig 7/8)
Warning
The plug must be removed from the power socket before any maintenance or replacement.
If the power cord is damaged, replace them only by the factory or maintenance center or
similarly qualified persons.
