Campomatic HC20W, Instruction Manual, Page: 6 / 14

6
hc20w
ENG
TIPS AND HINTS CONCERNING USE
The hair must be clean and dry.
Only cut small amounts of hair progressively until you reach the desired length. The cutting
head will jam if you try to work too quickly or try to cut too much hair at once. Let the appli -
ance run for a short time before starting to use it.
The cutting head allows you to finely trim your beard even in the hard to reach places
around your chin and neck.
THINNING OUT FUNCTION
This function evens out randomly distributed hairs
GUIDE COMB
Use the guide comb to shorten hair evenly to a length Of 3-15
mm . To set the desired length, press the closure latch of the
guide comb and slide it either upwards or downwardsThe set
length is indicated on the hair clipper.
SHAPING THE BEARD AND SHAVING THE BACK OF THE NECK CAN BE DONE
WITHOUT ATTACHMENTS.
1. Remove the attachment
2. Draw the cutting head at a low angle along your skin without applying pres -
sure.