background image

 

When changing the side at which the door opens, the appliance must not be connected to the 
mains. Remove plug from the mains beforehand. 

Tip: 

Food in the fridge should always be covered or packaged, to prevent drying and tainting of other 
food. 

The following are suited for packaging: 

 

Polyethylene airtight bags and wraps 

 

Plastic containers with lids 

 

Special plastic covers with elastic 

 

Aluminium foil 

 
 

1

 

Remove the three screws at the 
rear and the two screws at the 
top of the Upright Freezer and 
remove the lid.

 

 

2

 

Use an 8mm spanner to remove 
the bolts from the top bracket. 

 

3

 

Lift the hinge bracket out of the 
recess in the door. 

 

4

 

Remove the pin from the 
bracket with a 10mm 
spanner/socket. Replace in the 
same hole through the other 
side. Remove the door.

 

 

5

 

Lay the Upright Freezer 
backward. Remove the bottom 
hinge bracket using an 8mm 
socket or spanner. 

 

6

 

Remove the pin and replace on 
the opposite side using a 10mm 
socket or spanner. Reattach 
bottom bracket to the Upright 
Freezer. Replace leveling feet. 
Stand upright and replace door.

 

 

Summary of Contents for FRZ-307














Reviews: