7
DELETE ALL :
this function allows the user to delete all numbers
Handset Menu function 3: BS SETTINGS
The user is able to change the base setting in base settings item, press
key and use
▲ or ▼
key to
select this item. Then you can do below:
DELETE HANDSET
This function allows the user to delete a handset registration from the base.
1) Press
key, the first show is
DELETE HS
.
2) Press
key to enter, the user will be prompted to enter the PIN code.
3) Input the correct 4-digit pin code using digit key.
4) Press
▲ or ▼ key to scroll the handset names list up and down.
5) Press
key to confirm. The delete handset will be deleted from the list on registered handset on
the base, and the handset will behave according to the out of range condition.
NOTE:
Press and keep
“
” key for 5s,
IN USE/CHARGE
LED flashes, then press
“
” key 7 times
swiftly, then the
IN USE/CHARGE
LED flashes quickly. Then logout the base successful till
IN
USE/CHARGE
LED die out.
DIAL MODE
The user can select to change the mode in which the base will dial.
1) Press
key, then using
▲ or ▼
key to select
DIAL MODE
item.
2) Press
key to enter, and the display shows
TONE
.
3) Press
▲ or ▼
key to select the TONE or PULSE dial mode.
4) Press
key to confirm your selection.
FLASH TIME
The user can select to change the flash time (100ms, 300ms, 600ms and 1000ms).
1) Press
key, then using
▲ or ▼
key to select
FLASH TIME
item.
2) Press
key to enter.
3) Press
▲ or ▼ key to select the desired flash time among 100ms, 300ms, 600ms and 1000 ms.
4) Press
key to confirm your selection.
MODIFY PIN
This function allows the user to change the pin number of the currently active base.
1) Press
key to confirm.
2) Then using
▲ or ▼
key to select
MODIFY PIN
item.
3) Press
key to confirm, and the display shows
PIN?
.
4) The user will first be requested to entry the existing PIN code for the base by using numerical keys,
then press
to confirm.
5) If the old code is validated, the user will be prompted to enter a new PIN code (4 digits), press
to confirm.
6) Once a new PIN code has been entered, the user will be requested to repeat to input the new PIN
code.
