Camplux JK-5330, Instructions For Installation And Use Manual, Page: 7 / 24

Visit Us: Camplux.com
support@camplux.com
3330-A Marathon Ct Charleston, SC 29418
1(844) 538-7475
5
www.camplux.com
Operating Instructions
READ ALL SAFETY WARNINGS AND INSTRUCTIONS CAREFULLY.
● DO NOT allow gasoline or other flammable vapors or liquids to come in contact with stove while
lighting or at any time during use of stove.
● DO NOT allow the gas hose to come into contact with any hot surfaces. Inspect the hose for damage
such as burns, chafing, and kinks before each use.
WARNING
Step 1: Make sure “Gas Leak Testing” is completed and the burner control knobs are closed and the stove is on a
flat surface away from combustible material. The two side burners are to be ignited by piezo. The middle
grill burner is to be ignited by manual. We suggest to ignite one of the two side burners first.
WARNING
The stove shall not be exposed to flammable vapors or liquids during lighting.
Step 2: Decide which burner to light. Find the right ignition button which ignites this burner. Turn the burner control
knob to BIG FLAME position, then push the ignition button to ignite. If no ignition, push the button again. If
the burner is the middle burner, then no ignition button equipped. You can just ignite it with a long match.
WARNING
If the burner does not light within 5 seconds, close the burner control knob immediately. Wait at least 5 minutes
until gas fumes dissipates before attempting to light burner again.
Step 3: To light the other burners, reduce the flame on the first lit burner and repeat Step 2 to the other burners.
WARNING
If any of the burners does not light within 5 seconds, close the burner control knob immediately. Wait at least 5
minutes until gas fumes dissipates before attempting to light burner again.
WARNING
When you use the middle burner, the baking pan must be in place.
Step 4: Adjust burner flame as necessary by using burner control knob. Close the burner control knobs when the
stove is not in use.
Step 5: After use each time, allow stove to cool completely, then follow instructions in the “After Use Safety” and
"Proper Care and Maintenance" sections of this manual.