4. Installation / Application
4.1 Connect Extender
4.2 Connect IR module (this is optional)
Connect the IR sender to the HDMI extender sender “IR in” port;
Connect the IR receiver to the HDMI extender receiver “IR out” port;
Note:
Use the IR remote control of your HDMI source device at the receive end to operate and
control it.
5. Basic Troubleshooting
Q1:
The yellow LED fl ickers but slowly?
A1:
1) Check the connection of extender/sender and receiver.
2) Check that the HDMI video source is outputting a signal by attaching it to a local
display.
3) Check and replace the HDMI cable to both the sender and receiver units.
Q2:
The yellow LED fl ickers quickly but no picture outputs?
A2:
1) If input video source is an HDMI graphic card, please make sure the HDMI graph-
ic card output resolution is supported by your HDMI display.
2) Double check HDMI cable connections of both the sender and receiver.
3) Check and replace the HDMI cable to both the sender and receiver units.
4) Be certain you are using a singlemode fi ber optic cable.
Q3:
Yellow LED doesn’t light?
A3:
1) Make sure the fi ber optic cable is connected correctly and securely.
2) Check the fi ber optic cable end. Detach, clean properly and reinsert.
3) Make sure your fi ber optic cable is a singlemode cable.
Q4:
HDMI output display is abnormal or fl ickers?
A4:
Press the “reset” button to go-back to default setting. Make sure your display sup-
ports the resolution of the source.
Q5:
The IR remote control doesn’t work?
A5
: 1) Check the connection of IR blaster and IR receiver and make sure it’s correct.
2) Make sure the IR remote control can support a 38kHz signal.
6. Technical Specifi cations
HDMI Video Source
HDMI Extender TX
(sender)
HDMI Extender RX
(receiver)
HDMI
out
HDMI
in
www.camplex.com
Power Adapter
DC5V/2A (2 included)
HDMI
Parameters
DDC Signal Voltage
5Vp-p (TTL)
TMDS Bandwidth
10.2Gpbs
HDMI Input Resolution
Supported
480i@60Hz, 480p@60Hz,
576i@50Hz, 576p@50Hz,
720p@50/60Hz,
1080i@50/60Hz, 1080p@50/60Hz
HDMI Output
Resolution Supported
480p@60Hz, 576p@50Hz,
720p@50/60Hz, 1080p@50/60Hz
Fiber Wavelength
1310nm
Fiber Connection
ST Connectors
Fiber Type/Distance
SMF (single mode fi ber) / 0-20Km
Linked-Circuit Loss
≤14dB
Output Power
≥11dBm
Receive Sensitivity
≤-32dBm
IR Remote
Supports 38kHz
Power
Consumption
Tx: 5W / Rx: 5W
Dimensions
Each Tx/Rx Unit: 5”L x 3.375”W x 0.875”H (13 x 8.5 x 2.4 cm)
