10
GB
TROUBLE SHOOTING
Cartridge would not install
n
o gas supply in (
) position
smell gas in “
l
” position
low flame
u
neven flame
n
o ignition/
faulty ignition
extinction in operation
Trouble shooting
ignition knob is not turn to “
l
” position
P
Turn ignition knob completely to
“
l
” and reset cartridge.
safety device activated
P
P
P
Refer to explanation for safety
device / sTopgAz™ flame guard.
ignition knob malfunction
P
P
P
P
Contact local agent to repair.
Clogged nozzle
P
P
P
Contact local agent to repair.
Cartridge incorrectly installed
P
P
P
P
fit cartridge guide into cartridge
slot.
Clogged burner holes
P
P
P
use a metal brush to clean it.
Troubles
Causes
G - TROUBLESHOOTING
DON’T :
y
never leave wet sponges, cloths, or cleaning pads on the stainless steel surface.
y
never leave solutions of chlorine bleach and water on your stainless steel surface. Chlorides, which are found in most soaps,
detergents, bleaches, and cleansers, are very aggressive to stainless steel.
y
never use oven cleaners that contain caustic chemicals.
y
Do not use paper towel or scratch-sponges.
2 - Storage and transportation
- Check that the lever (2) is in the unloCk position (fig. 10).
- Always remove the gas cartridge from the stove during storage or transportation.
- store the stove and the cartridge in a cool, dry and well-ventilated area, out of reach of children. never store in a basement or
cellar.
