CamPilot MR900
CamPilot MR900 - 20090723
5 / 8
2. CamPilot MR900 Installation
• Installation Process
1) Connecting power supply, LAN and video/audio cables to a CamPilot.
■
DC 12V
- Power (DC 12V 1000mA Adapter)
■
ETHERNET
- LAN cable (RJ45 Jack)
- A client PC or a network devices is connected to the CamPilot
■
VIDEO
- Video cable (BNC Jack)
-
IN
: Input
-
OUT
: Mode Selectable output (Connected camera or received image over IP)
■
AUDIO
- Audio cable (
Ø3.5 Stereo Jack
)
-
IN
: Input from a microphone /
OUT
: Output to a speaker
■
DIO,
PTZ
- Control cable
-
DIO
: In case of using a sensor or a alarm device
-
PTZ
: In case of using pan/tilt/zoom contro (RS 485)
2) Executing NDC Manager Installation on PC (Ex: NDC Software 4.1 Installation)
- On each installing process, click ‘Yes’ or ‘Next’ to install by default.
- The programs like ENCP, NDC Manager, NDC Viewer and etc. are installed after the whole process.
(For details, please refer to the user’s guide of each program.)
▶
Connections – Power, LAN, Video, Audio, P/T, DIO
▶ NVS 4.1
installation
