Appendix E.
Tera Term
QuickStart
E-4
6. Select
Serial port
from the drop-down list in
Setup
. Change the port to
reflect what you will be using to work with the SR50AT/T. Leave the
other settings at their default values. Click the
OK
button when finished
).
FIGURE E-6. Configuring the Serial Port
7. All changes needed to work with the SR50AT/T are complete. You are
back at the main screen with the cursor blinking in the upper left corner of
the window. To see if communication has been established with the
SR40A/T, type
setup
and press
enter
. The word
setup
should appear in
the terminal window and the SR50AT/T setup window should appear as
well (FIGURE
FIGURE E-7. Testing the Configuration
