Campbell SP50-L, Product Manual

Page: 9 / 33

4. Locate the upper mount bracket with the angle decal on one end. Remove the nut, lock
washer, and washer from each end of the bracket and orient the bracket as shown in
FIGURE 3-3 (p. 7). Pass the bolts through the bracket and the last hole on each extended
mount arm, and then replace the washer, lock washer, and nut on each bolt (see FIGURE 3-
2 (p. 6)).
FIGURE 3-3. Attaching the upper mount bracket
5. Attach the bottom extended mount bracket to the extended mount struts as shown in
FIGURE 3-4 (p. 7).
FIGURE 3-4. Attaching the lower mount bracket
SP50-L, SP90-L, and SP305-L Solar Panels 7