Campbell SkyVUE 8, Product Manual

Page: 30 / 116

4.5 Connectors and wiring
4.5.1 Base connectors 18
4.5.2 Wiring using supplied Campbell Scientific cables 19
4.5.3 USB connection 21
4.5.4 I/O connection 22
4.5.1 Base connectors
The SkyVUE 8 has two connectors on its base. One connector (6 pins) is for communications;
another connector (4 pins) provides power to the unit.
NOTE:
Tilting the unit provides better access to these connectors.
FIGURE 4-3. Connector layout
The function of the connector pins is shown in Table 4-1 (p. 18), Table 4-2 (p. 19), and Table 4-3
(p. 19).
Table 4-1: Function of the connector pins for the mains connector
Pin Function Colo
ur
of supplied cable cores
1 Live Brown
2 Not connected NA
3 Neutral Blue
4 Earth Green/yellow
SkyVUE™8 (CS136) LIDAR Ceilometer 18