Campbell Sierra Wireless RavenXTV, Instruction Manual

Page: 11 / 50

RavenXTV CDMA Sierra Wireless Cellular Modem
3
Dimensions
Width: 7.6 cm (3 in)
Depth:
2.5 cm (1 in)
Length:
10 cm (4 in)
Weight: <0.5 kg (<1 lb)
4. Configuration
4.1 Base Station Requirements for RavenXTV
PC running Campbell Scientific’s
LoggerNet
or
PC400
software, with access
to the Internet.
4.2 Datalogger Site Equipment
•
Raven modem with power cable (included with modem).
•
Datalogger—21X, CR510, CR10(X), CR23X, CR7, CR1000, CR5000,
CR3000, CR800 Series, CR6, CR200(X) Series.
•
Modem Interface
If connecting to CS I/O port:
SC105 or SC932A Interface—connects the modem to the 21X,
CR510, CR10(X), CR7, or other dataloggers’ CS I/O port.
The SC105 must be configured for use with the modem using the
Device Configuration Utility
. Settings should be:
CS I/O Mode: SDC Address 7
RS-232 Mode: Modem
Baud Rate: 115.2K or 9600 baud depending on datalogger model
8 data bits, 1 stop bit, no parity
If connecting to RS-232 port:
PN 18663 Null Modem Cable—connects the modem to the
CR23X, CR3000, CR800, CR2XX, CR1000, or CR5000 RS-232
port.
PN 31055 CPI/RS-232 Cable—connects the modem to the CR6
CPI port.
•
PN 14394 Raven Mounting Kit—includes mounting hardware for securing
the modem to below-referenced environmental enclosure and a 9-pin male
to 9-pin female cable.
•
Antenna—the following antennas are available from Campbell Scientific.
Contact a Campbell Scientific applications technician for help in
determining the best antenna for your application.
o The 20679 is a dual-band, omnidirectional antenna for our CDMA
and GPRS digital-cellular modems. It covers both the 800-MHz band