Campbell SDM-CVO4, Instruction Manual

Page: 23 / 30

SDM-CVO4 4-Channel Current/Voltage Output Module
; Measure the wind direction from a potentiometer windvane
2: Excite-Delay (SE) (P4)
1: 1
Reps
2: 14 1000 mV, Fast Range
3: 1 SE Channel
4: 1 Excite all reps w/Exchan 1
5: 1 Delay (units 0.01 sec)
6: 1000 mV Excitation
7: 2 Loc [ WindDir ]
8: 0.357 Mult ; Scale to angle in degrees
9: 0.0 Offset
; Measure air temperature from a 107 probe
3: Temp (107) (P11)
1: 1
Reps
2: 2 SE Channel
3: 31 Excite all reps w/E1, 50Hz, 10ms delay
4: 3 Loc [ AirT ]
5: 1.0 Mult ; Scale to degrees C
6: 0.0 Offset
; Measure solar radiation from an SP-Lite
4: Volt (SE) (P1)
1: 1
Reps
2: 32 50 mV, 50 Hz Reject, Slow Range
3: 3 SE Channel
4: 4 Loc [ Radiation ]
5: 100 Mult
6: 0.0 Offset
; Now output data in the normal way to final storage
5: If time is (P92)
1: 0
Minutes (Seconds --) into a
2: 1 Interval (same units as above)
3: 10 Set Output Flag High (Flag 0)
6: Real Time (P77)
1: 110
Day,Hour/Minute (midnight = 0000)
7: Wind Vector (P69)
1: 1
Reps
2: 0 Samples per Sub-Interval
3: 0 S, é1, & å(é1) Polar
4: 1 Wind Speed/East Loc [ WindSpeed ]
5: 2 Wind Direction/North Loc [ WindDir ]
8: Average (P71)
1: 2
Reps
2: 3 Loc [ AirT ]
; Now the code to scale the values and update the SDM-CVO4
19