6. Click Connect. The radio Status LED will turn yellow. After several seconds, a screen similar
to
(p. 9) will appear:
Figure 7-2. RF451/RF452 settings
Deployment, Settings Editor, and Send OS tabs are available. The Deployment tab contains all
the standard parameters that need to be set for a PakBus® network. The Settings Editor tab may
be used to access all of the FreeWave® Radio settings. It should be used by experienced
FreeWave Radio users only. New operating systems for the Campbell Scientific board are loaded
through the Send OS tab.
Device Configuration Utility
makes applying the same settings to multiple devices easy. Once
settings are configured for one device, click Apply to save your changes; a summary screen
similar to
(p. 10) will be shown. Click Save to save a configuration file. This file can then
be used to load the settings into another RF451/RF452. Click Read File to load the settings in
Device Configuration Utility
. Then click Apply to save your changes to load the settings into the
RF451/RF452.
RF451/RF452 Spread Spectrum Radio
9
