![background image](http://html1.mh-extra.com/html/campbell/rainvue-10/rainvue-10_product-manual_488969018.webp)
Procedure
for
mounting
to
a
CM241
bracket
and
leve
ll
ing
the
sensor:
1. Loosen and remove the three base thumb screws then lift the funnel upward.
FIGURE 7-2. Thumbscrew on RainVUE 20
2. Remove the wing nuts and washers from the CM241 mounting bracket.
FIGURE 7-3. CM241 mounting bracket
RainVUE-Series SDI-12 Precipitation Sensors
8