Campbell PC400, User Manual

Page: 241 / 250

Appendix C. Log Files
TABLE C.1-1. Transaction Log Messages
Code Message Text Message Parameters Message Meaning User Response to
Message
94 Collect area
polling
complete Collect area name Data collection for
the specified collect
area has successfully
completed.
95 Collect area
polling failed Collect area name Data collection for
the specified collect
area failed. Check communications
with the datalogger by
trying to check the
clock. If that fails,
follow the steps for
message 14.
99 Collect area
first poll This message is
posted either the first
time data is collected
for a collect area, or
holes were lost for
the datalogger. If this is not the first
poll for the collect area,
this message indicates
that data that had been
stored in the datalogger
was lost before it could
be collected.
100 Table mount
failed Table name; Operating
system information
regarding the failure The server was not
able to create a data
collection area from
the stored table
configuration file or
new table definitions.
This could be the
result of trying to
create table files that
are too large for the
computer system. Check the computer
operating system
integrity. Verify that
the PC400 system
configuration files exist
and the directory has
not been corrupted.
101 Add record
failed
Table name; Beginning
record number; End record
number; A reason for the
failure The server was not
able to write data
records to the data
storage area. This indicates a
problem writing to files
on the computer hard
disk. Verify write
permissions are set and
that there is sufficient
space left on the disk.
102 Collect area
skipped
warning
Collect area name The specified collect
area was skipped
because the
associated table has
not been initialized
by the server yet. During system startup
this is a normal
message. If it occurs at
other times contact an
application engineer.
103 Collect area
skipped error
Collect area name The specified collect
area was skipped
because the server
could not initialize
the associated table. See message 100
C-11