Campbell NL241, Instruction Manual

Page: 73 / 76

E-1
Appendix E. Radio Frequency
Emission
Changes or modifications to the NL241 not expressly approved by Campbell
Scientific, Inc. could void the user’s authority to operate this product.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•
Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including
interference that may cause undesired operation.
The embedded radio transmitter approval:
FCC Identifier: XF6-RS9113SB
Industry Canada: 8407A-RS9113SB
View the EU Declaration of Conformity at www.campbellsci.com/nl241
NOTE