Campbell Met One 034B, Instruction Manual

Page: 19 / 34

Met One 034B Wind Set
9
7.2.2 Mount to Top of Tripod
The 034B can be attached to the top of a CM106B, CM110, CM115, or
CM120 tripod via the CM216 Sensor Mounting Kit (FIGURE 7-3 ). The
CM216 extends 10 cm (4 in) above the mast of the tripod.
FIGURE 7-3. CM216 mount
7.3 Wiring
Connections to Campbell Scientific CRBasic dataloggers are given in TABLE
7-1 .
TABLE 7-1. Wire Colo u r, Wire Function, and Datalogger Connection
Wire Colo u r Wire Function
Datalogger Connection
Terminal
Red WS Signal
U
configured for pulse input 1 ,
P (pulse input), or P_SW
(pulse, switch closure input)
Black WS Signal Reference
⏚
Green WD Signal
U configured for single-ended
analog input 1 , SE (single-
ended, analog input)
Blue WD Voltage Excitation
U configured for voltage
excitation 1 ,
EX
, or
VX
(voltage
excitation)
White WD Signal Reference
AG or ⏚ (analog ground)
Clear Shield
AG or ⏚ (analog ground)
1
U channels are automatically configured by the measurement instruction.