HydroSense II Soil Moisture Measurement System
31
11.17
System Settings
This submenu contains a list of system-wide settings. Using the up and down
keys, highlight one of the options shown and press
OK
to select that item.
Alternatively, press the
Back
button to exit the menu.
11.18
System On Time
To save power, the HydroSense II will automatically power off after a period of
inactivity. This menu allows configuration of this time period. Press the Left and
Right buttons to choose between the different timeout periods and press
OK
to
save the change. Pressing
Back
will exit without saving.
If the system on time is set to “Always on” the HydroSense II will only turn off
when the
MENU/PWR
button is used. This will increase the average power
consumption significantly. If the device is then left running by accident, the
batteries are likely to be exhausted in just a few days.
11.19
Restore Settings
This menu restores the HydroSense II to its factory defaults. Press
OK
to
overwrite all configuration settings with default values or
Back
to exit without
changing settings.
This step cannot be reversed. If the unit is inadvertently set to factory defaults,
all settings will need to be restored manually through the previous menus.
