HS2 and HS2P
7.1 Buttons
User Interface Buttons
Button
Function
Power/MENU — To turn the HydroSense II on or off, press and
hold this button for 3 seconds. When pressed for less than 3
(p. 14), the
(p. A-1) will be
displayed.
READ/OK — Triggers a new measurement in the
(p. 14). Also used to select an item in a list or to answer “OK” to
prompts.
(p. 14), used to store the
current reading to flash memory. In the menu system, used to
move “Back” to the previous menu.
Up — Moves the cursor up.
Down — Moves the cursor down.
Left — Moves the cursor to the left.
Right — Moves the cursor to the right.
7.2 Splash Screen
To turn the HydroSense II on, press and hold
for 3 seconds. The
following splash screen is displayed.
The operating system version number and device serial number are displayed.
The splash screen is shown for 2.5 seconds.
7.3 Main Screen
After the splash screen, the main screen is shown. The main screen contains a
number of different elements which are explained in the following subsections.
14
