Campbell ET107, Product Manual

Page: 60 / 106

ET107 Weather Station
51
5.7 Lightning Rod Installation
Install lightning rod as shown in FIGURE 5-41 and FIGURE 5-42 .
1. Carefully mount the lightning rod clamp to the top of the pole (FIGURE
5-41 ). Position the clamp so it won’t interfere with the connector cover.
FIGURE 5-41. Lightning rod bracket installation
2. Strip 2.54 cm (1 in) from the top of the main green 10 AWG pole ground
wire.
3. Insert the exposed wire into the empty clamp opening. Do not tighten the
screw at this time (FIGURE 5-42 ).
FIGURE 5-42. Grounding to lightning rod clamp