Campbell ENC 10/12, Product Manual, Page: 26 / 51

FIGURE 6-15. Flange connection (CM106B).
3. Slide the U-bolt bracket onto the outer –LM mounting bracket (see FIGURE 6-16 (p. 20)).
Use the furnished 2.5-inch U-bolt to secure the –LM mounting bracket to a tripod. The
CM106K requires a user-supplied 5/16-18 x 1.5 inch U-bolt due to the smaller tripod leg size.
FIGURE 6-16. U-bolt connection
4. Route the 14 AWG wire from the brass tripod ground clamp to the enclosure ground lug.
Strip 2.5 cm (1 in) of insulation from each end of the wire and insert the end of the wire
into the ground lugs and tighten.
Enclosures 20