Once you’ve received the equipment, please set it up as described and power up the system. The data
logger will automatically start sending data to Campbell CLOUD and enable Campbell Scientific to confirm
the operation of the system. A follow-up email will be sent with further instructions for you to log into
Campbell CLOUD and verify the data is flowing as expected.
Note:
The data logger has been configured for the UTC time zone to support the needs of the workshop.
Please leave the time zone at this setting.
Important Information
Summary of Contents for DIGITAL WORKSHOP WEATHER STATION
