CS511-L Dissolved Oxygen Probe
3.
Select
CS511 Dissolved Oxygen Probe,
and select the
right arrow
(in
center of screen) to add it to the list of sensors to be measured, and then
select
Next
.
4.
Define the name of the public variables and enter the calibration
multiplier. Variables default to
DOmv
for the millivolt measurements and
DOppm
for the ppm values. The default calibration value of 0.34 is based
on an average. It is preferable to calibrate the probe using the procedure
provided in Section 7.3,
Calibration
. After entering the information, click
on
OK
, and then select
Next
.
6
Summary of Contents for CS511-L
