![background image](http://html1.mh-extra.com/html/campbell/crvw3/crvw3_instruction-manual_489101029.webp)
CRVW3 3-Channel Vibrating-Wire Datalogger
16
This software is also available as a free download from the Campbell scientific
website (
www.campbellsci.com/19_1_9999_83
). Check the version of any previously
installed
DevConfig
software to ensure it is version 2.10 or later. If it is an
earlier version, it will need to be upgraded using a newer installation program.
The installation program can also be found on the
ResourceDVD
which is
included with most hardware orders shipped from Campbell Scientific.
If you upgrade your
LoggerNet
,
PC400
, or
PC200W
software
from an earlier version to version 4.3, version 2.10 of
DevConfig
should automatically be installed during that process.
8.1.1.2 Install the CRVW3 USB Driver
In order to make a wired communications connection between the CRVW3 and
the PC, it is necessary to use a USB cable. This requires a driver to be installed
on Windows in order to operate correctly.
NOTE
Summary of Contents for CRVW3
