Campbell CRS451, User Manual

Page: 25 / 40

User Manual
17
4. Select a data file you wish to use as the barometric pressure reference data
file.
a) Use the drop-down list to select the Barometric Pressure Reference
Column in the data file.
The reference column must be a measurement of pressure or level. If
from a nearby Campbell Scientific weather station, note that the
reference column must have units associated with it. The units can be
any pressure or level units as defined in HydroSci and they must match
exactly the HydroSci abbreviation as shown here.
The following pressure and level units are defined in HydroSci:
HydroSci Abbreviation Units of Measure
mm millimetre
m metre
ft feet
in inch
mb millibar
bar bar
kPa kilopascal
psia psi absolute
5. Press the browse button next to the Corrected Data File field to indicate
where the corrected data file should be stored.
Rename the file as applicable.
6. After completing all of the fields, press the Build Corrected Data File
button.