Campbell CR6 Series, Operator'S Manual

Page: 503 / 690

Section 8. Operation
503
fields in the Status table are preserved when sending a subsequent operating
system by this method; data tables are erased. Rely on this feature only with an
abundance of caution when sending an OS to CR6s in remote, expensive to get to,
or difficult-to-access locations.
8.8.4.2 Program Send Reset
Final-storage
(p. 583)
data are erased when user programs are uploaded, unless
preserve / erase data options are used. Preserve / erase data options are presented
when sending programs using File Control Send
(p. 583)
command and CRBasic
Editor Compile, Save and Send
(p. 578).
See Preserving Data at Program Send
(p.
231)
for a more-detailed discussion of preserve / erase data at program send.
8.8.4.3 Manual Data-Table Reset
Data-table memory is selectively reset from
•
Support software Station Status
(p. 602)
command
•
CR1000KD Keyboard/Display: Data | Reset Data Tables
8.8.4.4 Formatting Drives
CPU:, USR:, USB:, and CRD: drives can be formatted individually. Formatting
a drive erases all files on that drive. If the currently running user program is
found on the drive to be formatted, the program will cease running and any
SRAM data associated with the program are erased. Drive formatting is
performed through datalogger support software Format
(p. 583)
command.
8.8.5 File Management in CR6 Memory
As summarized in table File Control Functions
(p. 503),
files in CR6 memory
(program, data, CAL, image) can be managed or controlled with datalogger
support software
(p. 97),
the CR1000KD keyboard/display (see
Keyboard Display
— Details
(p. 532))
, Web API
(p. 524, p. 524),
or CoraScript
(p. 577).
Use of CoraScript is
described in the LoggerNet software manual, which is available at
www.campbellsci.com . More information on file attributes that enhance
datalogger security, see the
Security — Overview
(p. 94)
section.