The notch must be on the correct side. Inserting the PROM in the
wrong direction can damage it.
Set the pins of the PROM on the
sockets and press gently. Make sure
individual pins are being inserted
straight into the socket clips and are
not bending. Gently push the PROM
in until it seats fully in the socket.
Inspect the PROM assuring that none of the pins have been bent
or are not seated in their corresponding socket clips.
13. Repeat steps 9 through 1 (in reverse
order) to reassemble the CR10.
Copyright © 2002 Campbell Scientific, Inc.
5
815 W. 1800 N., Logan, UT 84321-1784 (435) 753-2342
App. Note: 1D-T
CR10 PROM Replacement Procedure
