manualshive.com logo in svg

Campbell COM210, Instruction Manual

Share
Download
Campbell COM210 Instruction Manual Download Page 2

Warranty and Assistance 

The

 

COM210 TELEPHONE MODEM 

is warranted by CAMPBELL 

SCIENTIFIC, INC. to be free from defects in materials and workmanship 
under normal use and service for twelve (12) months from date of shipment 
unless specified otherwise.  Batteries have no warranty.  CAMPBELL 
SCIENTIFIC, INC.'s obligation under this warranty is limited to repairing or 
replacing (at CAMPBELL SCIENTIFIC, INC.'s option) defective products.  
The customer shall assume all costs of removing, reinstalling, and shipping 
defective products to CAMPBELL SCIENTIFIC, INC.  CAMPBELL 
SCIENTIFIC, INC. will return such products by surface carrier prepaid.  This 
warranty shall not apply to any CAMPBELL SCIENTIFIC, INC. products 
which have been subjected to modification, misuse, neglect, accidents of 
nature, or shipping damage.  This warranty is in lieu of all other warranties, 
expressed or implied, including warranties of merchantability or fitness for a 
particular purpose.  CAMPBELL SCIENTIFIC, INC. is not liable for special, 
indirect, incidental, or consequential damages. 

Products may not be returned without prior authorization.  The following 
contact information is for US and International customers residing in countries 
served by Campbell Scientific, Inc. directly.  Affiliate companies handle 
repairs for customers within their territories.  Please visit 
www.campbellsci.com to determine which Campbell Scientific company 
serves your country.  To obtain a Returned Materials Authorization (RMA), 
contact CAMPBELL SCIENTIFIC, INC., phone (435) 753-2342.  After an 
applications engineer determines the nature of the problem, an RMA number 
will be issued.  Please write this number clearly on the outside of the shipping 
container.  CAMPBELL SCIENTIFIC's shipping address is: 

 

 

CAMPBELL SCIENTIFIC, INC. 

 RMA#_____ 
 

815 West 1800 North 

 

Logan, Utah 84321-1784 

 

CAMPBELL SCIENTIFIC, INC. does not accept collect calls. 

 

 

 

Summary of Contents for COM210





























Reviews:

No comments

Brands by name

Popular brands

Load more brands