Campbell CMP11-L, Instruction Manual

Page: 13 / 42

CMP6-L, CMP11-L, and CMP21-L Pyranometers
4.3 Datalogger Programming / Wiring
The simplest method for programming the datalogger to measure a CMP6 or
CMP11 is to use Campbell Scientific's SCWin Short Cut Program Generator
(see FIGURE 4-5). Wire the pyranometer according to the wiring diagram
generated by Short Cut.
The CMP21 is not included in Short Cut. Refer to Section 7,
Installation , for wiring and programming information if not
using Short Cut.
NOTE
FIGURE 4-5. SCWin Short Cut Program Generator
5