![background image](http://html1.mh-extra.com/html/campbell/ccfc-ptz/ccfc-ptz_supplementary-manual_3773152012.webp)
10
9.
Pan Tilt Mount
The camera enclosure is designed to be environmentally sealed
for outdoor installations. The enclosure provides protection from
moisture or high humidity. It is not intended for operation under
water. All that is required is an appropriate mounting fixture.
Figure 3-1 CCFC Pan Tilt Base
The camera is equipped with a set of three ¼-20 threaded
mounting holes (see Figure 22-2). These mounting holes are
centered along the bottom of the camera and are spaced 1.0” (25.4
mm) apart from one another. At least two of the ¼-20 threaded
holes are required for mounting the camera. Use the two supplied
¼” bolts with washer and lock washer to affix the camera to the
pan tilt mount.
Figure 3-2 CCFC Mounting Holes
Mounting
Holes