Campbell BMP5 Direct SDK Instruction Manual Download Page 5

Limited Warranty 

The following warranties are in effect for ninety (90) days from the date of 
shipment of the original purchase. These warranties are not extended by the 
installation of upgrades or patches offered free of charge: 

Campbell Scientific warrants that the installation media on which the software 
is recorded and the documentation provided with it are free from physical 
defects in materials and workmanship under normal use. The warranty does not 
cover any installation media that has been damaged, lost, or abused. You are 
urged to make a backup copy (as set forth above) to protect your investment. 
Damaged or lost media is the sole responsibility of the licensee and will not be 
replaced by Campbell Scientific.   

Campbell Scientific warrants that the software itself will perform substantially 
in accordance with the specifications set forth in the instruction manual when 
properly installed and used in a manner consistent with the published 
recommendations, including recommended system requirements. Campbell 
Scientific does not warrant that the software will meet licensee’s requirements 
for use, or that the software or documentation are error free, or that the 
operation of the software will be uninterrupted.  

Campbell Scientific will either replace or correct any software that does not 
perform substantially according to the specifications set forth in the instruction 
manual with a corrected copy of the software or corrective code.  In the case of 
significant error in the installation media or documentation, Campbell 
Scientific will correct errors without charge by providing new media, addenda, 
or substitute pages. If Campbell Scientific is unable to replace defective media 
or documentation, or if it is unable to provide corrected software or corrected 
documentation within a reasonable time, it will either replace the software with 
a functionally similar program or refund the purchase price paid for the 
software.  

All warranties of merchantability and fitness for a particular purpose are 
disclaimed and excluded. Campbell Scientific shall not in any case be liable for 
special, incidental, consequential, indirect, or other similar damages even if 
Campbell Scientific has been advised of the possibility of such damages. 
Campbell Scientific is not responsible for any costs incurred as a result of lost 
profits or revenue, loss of use of the software, loss of data, cost of re-creating 
lost data, the cost of any substitute program, telecommunication access costs, 
claims by any party other than licensee, or for other similar costs. 

This warranty does not cover any software that has been altered or changed in 
any way by anyone other than Campbell Scientific. Campbell Scientific is not 
responsible for problems caused by computer hardware, computer operating 
systems, or the use of Campbell Scientific’s software with non-Campbell 
Scientific software. 

Licensee’s sole and exclusive remedy is set forth in this limited warranty. 
Campbell Scientific’s aggregate liability arising from or relating to this 
agreement or the software or documentation (regardless of the form of action; 
e.g., contract, tort, computer malpractice, fraud and/or otherwise) is limited to 
the purchase price paid by the licensee.  

Summary of Contents for BMP5 Direct SDK

































Reviews: