B-1
Appendix B. Example Measurements
and Programs
This section covers sensor-to-AM16/32B connections and AM16/32B-to-
datalogger connections. Most programs were created in
Short Cut
. The
following are examples only and should not be construed as the only way to
make a particular measurement. See the measurement section of the datalogger
manual for more information on basic bridge measurements. Most of the
following examples do not depict datalogger-to-AM16/32B control
(p. 12)
), but their presence is
implied and required.
B.1 Single-Ended Voltage Measurement
shows a typical connection for single-ended voltage
measurements. Using this method, a datalogger can make up to 48 single-
ended voltage measurements through a multiplexer. See CRBasic Example
for a related program and wiring
diagram, or use
Short Cut
to create your own.
FIGURE B-1. Typical single-ended voltage measurement connection
