background image

WARRANTY AND ASSISTANCE

The

 

AM-ENC Analog Multiplexer Enclosure 

is warranted by CAMPBELL SCIENTIFIC, INC. to be free

from defects in materials and workmanship under normal use and service for twelve (12) months from
date of shipment unless specified otherwise.  Batteries have no warranty.  CAMPBELL SCIENTIFIC,
INC.'s obligation under this warranty is limited to repairing or replacing (at CAMPBELL SCIENTIFIC,
INC.'s option) defective products.  The customer shall assume all costs of removing, reinstalling, and
shipping defective products to CAMPBELL SCIENTIFIC, INC.  CAMPBELL SCIENTIFIC, INC. will return
such products by surface carrier prepaid.  This warranty shall not apply to any CAMPBELL SCIENTIFIC,
INC. products which have been subjected to modification, misuse, neglect, accidents of nature, or
shipping damage.  This warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability or fitness for a particular purpose.  CAMPBELL SCIENTIFIC, INC. is not
liable for special, indirect, incidental, or consequential damages.

Products may not be returned without prior authorization.  To obtain a Returned Materials Authorization
(RMA), contact CAMPBELL SCIENTIFIC, INC., phone (435) 753-2342.  After an applications engineer
determines the nature of the problem, an RMA number will be issued.  Please write this number clearly on
the outside of the shipping container.  CAMPBELL SCIENTIFIC's shipping address is:

CAMPBELL SCIENTIFIC, INC.

RMA#_____
815 West 1800 North
Logan, Utah 84321-1784

CAMPBELL SCIENTIFIC, INC. does not accept collect calls.

Non-warranty products returned for repair should be accompanied by a purchase order to cover the repair.

815 W.  1800 N.
Logan, UT 84321-1784
USA
Phone  (435) 753-2342
FAX  (435) 750-9540
www.campbellsci.com

Campbell Scientific Canada Corp.
11564 -149th Street
Edmonton, Alberta T5M 1W7
CANADA
Phone  (780) 454-2505
FAX  (780) 454-2655

Campbell Scientific Ltd.
Campbell Park
80 Hathern Road
Shepshed, Loughborough
LE12 9GX, U.K.
Phone  +44 (0) 1509 601141
FAX  +44 (0) 1509 601091   

Summary of Contents for AM-ENC Analog Multiplexer Enclosure









Reviews: