When A2Control begins communicating with the AL205R/AL205B, it will display the
firmware type and version, and, if the AL205R/AL205B is connected to the network, the
device IP address.
NOTE:
A2Control also can connect to the AL205R/AL205B remotely using TCP/IP by choosing
network connection in the serial port drop down menu instead of a port number.
Remote access to the AL205R/AL205B is disabled by default. To enable it, launch
A2Control software, click the gear icon, click the IP Settings tab, and set the Network
Password.
5. Click the gear icon to access the configuration window.
(p. 7) describes the
settings that need to be changed for the initial configuration.
NOTE:
Only the settings that need to be changed are included in the table.
AL205R / AL205B ALERT2 Repeater / Base
6
